SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
115
1. In the left navigation menu, click
Wireless
>
Wireless Bridge
. The following page appears.
2. Modify the fields as needed, using the information provided in the table below.
Field Name
Description
AP Mode
Select whether to use this gateway as an access point or a wireless bridge. The default is
Access
Point
.
Bridge Restrict
Enable or disable the bridge restrict function for MAC addresses in the
Remote Bridges MAC
Address
field. Options are:
l
Enabled
: Allow only those bridges selected in the
Remote Bridges MAC Address
table to access the wireless LAN. This is the default.
l
Enabled (Scan):
Allow only those bridges selected in the
Remote Bridges MAC
Address
table to access the wireless LAN but the scanning feature is active.
l
Disabled
: Disable the wireless MAC address filtering function. Any wireless bridge
can access the wireless LAN.
Remote Bridges
MAC Address
Enter up to four MAC addresses for the remote bridges that are allowed to access the wireless
LAN.
3. Click
Apply/Save
to save your settings.
Advanced
On this page, you can configure the advanced features of the wireless LAN interface. You can select a particular channel on which to
operate, force the transmission rate to a desired speed, set the fragmentation threshold, the RTS threshold, the wakeup interval
for clients in power-save mode, and more.
