SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
72
Quality of Service
On this page, you can enable or disable QoS and set the DSCP Mark classification
.
The maximum number of queues that can be configured vary by mode, as shown below.
Mode
Maximum # of queues
ATM
16
Ethernet &
Ethernet WAN
8 per interface
PTM
8
Note:
Queues for wireless connections (e.g., WMM Voice Priority) are shown only when wireless is enabled. If the
WMM Advertise
option on the Wireless > Basic Setup page is disabled, assigning classifications to wireless traffic has no effect.
1. In the left navigation bar, click
Advanced Setup
>
Quality Of Service
. The following page appears. The Quality of
Service feature is enabled by default.
2. To disable QoS for
ALL
interfaces, click the
Enable QoS
check box to clear it.
3. (
Optional
) Select the default DSCP Mark (Differentiated Services Code Point) classification value to be used. The
default is
No Change(-1)
.
4. Click
Apply/Save
to save your settings.
QoS Queue
On this page, you can configure a queue and add it to a selected Layer2 interface. You can also edit and delete queues. A number of
standard queues are already defined. You may have to remove queues that you don't need in order to create the desired queues.
