SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
112
Modify the fields as needed, using the information provided in the table below, and then click
Apply/Save
.
Field Name
Description
Protected Management
Frames
Select whether management frames are protected. Options are
Disabled
,
Capable
, and
Required
. The
default is
Disabled
.
WPA2 Preauthentication
Select whether clients can pre-authenticate with the gateway while still connected to another AP.
Options are
Enabled
and
Disabled
. The default is
Disabled
.
Network Re-Auth
Interval
Enter the interval at which the client must re-authenticate with the gateway. The default is
36000
seconds (10 hours).
WPA Group Rekey
Interval
Enter the frequency at which the gateway automatically updates the group key and sends it to
connected LAN client devices. Options are
0
-
65535
seconds. The default is
0
.
RADIUS Server IP address Enter the IP address of the RADIUS (Remote Authentication Dial In User Service) server associated with
your network.
RADIUS Port
Enter the port number for the RADIUS server. Options are
1
-
65535
. Port
1812
is the default and is the
current standard for RADIUS authentication per the IETF RFC 2865. Older servers may use port
1645
.
RADIUS Key
(
Optional
) Enter the encryption key needed to authenticate to the specified RADIUS Server.
WPA Encryption
Select the encryption standard. This field is displays the option most compatible with the selected
network authentication method. Options are:
l
AES
: Advanced Encryption Standard. This is the default.
l
TKIP+AES
: AES combined with TKIP (Temporary Key Integrity Protocol) allows access by
either standard.
WPA2-PSK and Mixed WPA2/WPA-PSK Authentication
The following fields appear when you select
WPA2-PSK
or
Mixed WPA2/WPA-PSK
in the
Network Authentication
field. The
WEP
Encryption
field is set to
Disabled
and cannot be changed.
