SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
7
Feature
Description
Left side
On/Off
Power switch.
USB2
Can transfer data, act as a printer interface, and handle a 3G accessory.
5GHz
Enables or disables the 5GHZ wireless function. (May be labeled
WPS
on early production units)
2.4GHz
Enables or disables the 2.4GHZ wireless function. (May be labeled
WiFi
on early production units)
External Buttons
Smart SmartRG gateways provide push-button controls on the exterior for critical features. These buttons provide a convenient way
to toggle the Wi-Fi radio on and off or reset the gateway. These controls are described below.
2.4GHz and 5GHz Buttons
Note:
On early production units of the SR555ac gateway, these buttons are labeled WiFi (instead of 2.4 GHz) and WPS (instead of 5
GHz).
These buttons are located on the left side of the gateway and control the Wi-Fi radio functions.
To turn a wireless radio on or off, press the related button briefly (1-2 seconds). For example, to turn the
2.4 GHz
radio on or off,
press the
2.4GHz
button for 1-2 seconds.
To enable WPS, press the related button and hold it for 4-6 seconds.
Reset Button
The
Reset
button is a small hole in the back of the gateway with the actual button mounted beneath the surface. This style of push-
button prevents the gateway from being inadvertently reset during handling.
Warning:
Do not press the
Reset
button unless you are sure that you want to clear the current settings.
To reset your gateway, use a fine wire (such as a paper clip) to press the button for 7-10 seconds and release. The factory default
settings are restored.
