SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
50
Field Name
Description
Target
Enter the host IP or network address. Enter specific IP addresses for a single device or identify an entire subnet.
e.g., enter 192.168.1.0 to identify that subnet as the target.
Netmask
(
Appears for IPv4 routes only
) Enter the net mask for the target IP address.
Gateway
Enter the gateway address for the route.
Metric
Enter the number of hops needed to reach the default gateway. The default is
0
.
DNS
On this page, you can configure network DNS servers.
1. In the left menu, click
Network
>
Routing
>
DNS
. The following page appears.
2. To add a custom DNS server:
a. Click the
Add server
button. The
Add/Edit DNS Server
dialog box appears.
b. Enter the IP address of the custom DNS server.
c. Click
Save changes
.
d. To add another IP address, repeat steps a - c.
3. To change a DNS server address:
a. Click the
Edit
(
) icon next to it. The Add/Edit dialog box appears.
b. Enter the new server address
c. Click
Save Changes
to commit your changes.
