SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
74
Pausing Internet Access
You can halt a device's access to the Internet for a specific amount of time.
1. Click
INTERNET ACCESS
to expand the pane.
2. Click the
Pause
button. The
Set Timeout(ms)
field appears.
3. Select a time period. Option are
15 minutes
-
1 day
.
4. Click the
Pause
button below the field. The
Play
button becomes active.
5. Close the device details pane.
Connected Devices
This page displays a list of devices connected to the LAN.
Note:
Before you can assign a device to a group, you must configure an access schedule, then configure a device group, and finally
assign the schedule to the group.
Warning:
Pausing access for LAN devices not only restricts access to the Internet but LAN access as well. This in turn prevents you
from logging in to the SmartRG gateway to make changes from any LAN clients included in the pause. With this in mind, users are
strongly advised against pausing all LAN devices at the same time. Instead, exclude at least one browser-equipped LAN device from
the Device Group to ensure that a means to modify access schedules, device groups and timeout periods is preserved.
1. In the left menu, click
Devices
>
Connected Devices
. The following page appears.
2. To refresh the list to show only active devices, click the
Clear Inactives
button (
to the right of the table title.
