Installation Steps
61179641L5-5C
3-5
Flush-mount
For flush-mount systems, the Total Access 1248 must be mounted from the front of the rack,
with mounting brackets in the flush-mounting orientation (see
). When flush-
mounting a Total Access 1248 in the rack, use a #2 phillips-head screwdriver and attach the
mounting brackets, with the flanges containing the slotted rack-mounting holes facing the
front, to the mounting bracket holes closest to the front of the Total Access 1248.
Using four screws appropriate for the mounting rack and the appropriate screwdriver, secure
the Total Access 1248 in place on the rack.
Figure 3-2. Flush-mount Orientation
19-inch Mounting Brackets
23-inch Mounting Brackets
Flush-mount Orientation
FRONT
BACK
