Total Access 1248 Expansion DSLAM Installation and Maintenance Practice
3-6
61179641L5-5C
Mid-mount
For mid-mount systems, the Total Access 1248 must be mounted from the rear of the rack,
with mounting brackets in the mid-mounting orientation (see
). For mid-mounting a
Total Access 1248 in the rack, use a #2 phillips-head screwdriver and attach the mounting
brackets, with the flanges containing the slotted rack-mounting holes facing the front, to the
mounting bracket holes closest to the back of the Total Access 1248.
Using four screws appropriate for the mounting rack and the appropriate screwdriver, secure
the Total Access 1248 in place on the rack.
Figure 3-3. Mid-mount Orientation
FRONT
BACK
Mid-mount Orientation
19-inch Mounting Brackets
23-inch Mounting Brackets
