Total Access 3000/3010 System Manual
6TADLP728-1E
TOTAL ACCESS 3000/3010
DLP-728
Page 3 of 4
© 2003, ADTRAN, Inc.
Perform Steps Below in the Order Listed
3.
From the Total Access Main menu, select
System Controller Unit
, and press
<Enter>.
4.
From the System Controller Unit menu, select
Provisioning
, and press
<Enter>.
5.
From the Provisioning menu, select
SCU/System Administration
, and press
<Enter>.
6.
From the System Administration menu, select
Software Update
, and press
<Enter>.
7.
From the Software Update menu, select
TFTP Update
, and press
<Enter>.
8.
From the TFTP Update menu, select
Firmware TFTP Server
, and press
<Enter>.
9
Enter and/or verify the IP Address of the TFTP Server containing the
software file.
10. From the TFTP Update menu, select
Remote Filename
, and press
<Enter>.
11. Enter the name of the file that was saved to the TFTP Server in step 1.
Be sure to include all punctuation and file extensions that are associate with the
file.
12. From the TFTP Update menu, select
Initiate Transfer
, and press
<Enter>.
13. The TFTP Status will state Transfer in Progress while transferring, and
Transfer Complete when finished
14. The Flash Status will state Flash Write Completed when finished.
Once the Flash Status flashes Flash Write Completed, press <Esc> twice to return
tothe Software Update menu
15. Select
Reboot SCU
, and press <Enter>.
