6TADLP729-1E
TOTAL ACCESS 3000/3010
DLP-729
Page 4 of 6
© 2003, ADTRAN, Inc.
Total Access
®
3000/3010 System Manual
1.2.2
Configure the Global SCA Settings
1.
From the Total Access 3000/3010 Main menu, select System Controller, and
press <Enter>.
2.
From the System Controller Main menu, select Provisioning, and press
<Enter>.
3.
From the Provisioning menu, select SCU/System Administration, and press
<Enter>.
4.
From the SCU/System Administration menu, select System Configuration
Archive (SCA), and press <Enter>.
5.
From the System Configuration Archive (SCA) menu, select SCA Operations,
and press <Enter>.
6.
From the SCA Operations menu, select SCA TFTP Server, and press
<Enter>.
Enter the IP address or hostname of the TFTP server that is to store the SCA
files. This field will support up to 30 characters.
7.
Return to the Main menu by pressing <Esc>.
1.2.3
Configure the SCA System for Automatic Archival
1.
From the Total Access 3000/3010 Main menu, select System Controller, and
press <Enter>.
2.
From the System Controller Main menu, select Provisioning, and press
<Enter>.
3.
From the Provisioning menu, select SCU/System Administration, and press
<Enter>.
4.
From the SCU/System Administration, select System Configuration Archive
(SCA), and press <Enter>.
5.
From the System Configuration Archive menu, select SCA AutoSave
Provisioning, and press <Enter>.
6.
From the SCA AutoSave Provisioning menu, select AutoSave System, and
press <Enter>.
The following settings will be available:
• Enable
• Disable
This option is the master control for the automatic save. If this option is enabled,
automatic saves will occur as scheduled. If this option is disabled, automatic saves
will not occur (manual saves may still be performed).
7.
Select Disable and continue to the next step.
Perform Steps Below in the Order Listed
