6TADLP729-1E
TOTAL ACCESS 3000/3010
DLP-729
Page 5 of 6
Total Access
®
3000/3010 System Manual
© 2003, ADTRAN, Inc.
8.
From the SCA AutoSave Provisioning menu, select AutoSave Only If Prov
Changes, and press <Enter>.
The following settings will be available:
• Enable
• Disable
This option, if set to enable, prohibits automatic saves unless a provisioning option
changed after the previous save. If this option is set to disable, automatic saves
will occur according to the normal schedule.
9.
Select the appropriate option, according to the central office standard
operating procedure or network administrator, and continue to the next step.
10. From the SCA AutoSave Provisioning menu, select AutoSave Filename Prefix,
and press <Enter>.
This option provides a field that will support up to 30 characters. The contents of
this field make up the first portion of the system configuration archive filename
written to the TFTP server.
11. Input the appropriate filename prefix and press <Enter>.
12. From the SCA AutoSave Provisioning menu, select AutoSave Filename Suffix,
and press <Enter>.
This option provides a field that will support up to 8 characters. The contents of
this field make up the last portion of the system configuration archive filename
written to the TFTP server.
13. Input the appropriate filename suffix and press <Enter>.
14. From the SCA AutoSave Provisioning menu, select Max AutoSave File
Instances, and press <Enter>.
This option may be set between 1 and 7 and controls the number of SCA files
stored on the TFTP server for each system. Refer to the description in step 1 for
more information concerning this field.
15. Enter the maximum file instances and press <Enter>.
16. From the SCA AutoSave Provisioning menu, select AutoSave Time (Hour),
and press <Enter>.
17. Using 24-hour clock hours, enter the hour in which the automatic save
function should occur.
18. From the SCA AutoSave Provisioning menu, select AutoSave Time (Minute),
and press <Enter>.
19. Enter the minute of the hour in which the automatic save function should
occur.
Perform Steps Below in the Order Listed
