6TADLP729-1E
TOTAL ACCESS 3000/3010
DLP-729
Page 6 of 6
© 2003, ADTRAN, Inc.
Total Access
®
3000/3010 System Manual
20. From the SCA AutoSave Provisioning menu, select AutoSave Retries, and
press <Enter>.
This option dictates the number of times the SCU will try to transfer the file to the
TFTP server if the previous attempt fails. The number of retries may be set
between 0 and 99.
21. Verify the SCA automatic save was successful.
Verification of SCA automatic save can be accomplished by verifying that the
SCA filename (including the defined prefix, instance, and suffix) appears on the
TFTP server after an automatic save is scheduled to occur.
1.2.2 To Manually Perform a SCA Save:
1.
From the Total Access 3000/3010 Main menu, select System Controller, and
press <Enter>.
2.
From the System Controller Main menu, select Provisioning, and press
<Enter>.
3.
From the Provisioning menu, select SCU/System Administration, and press
<Enter>.
4.
From the SCU/System Administration menu, select System Configuration
Archive (SCA), and press <Enter>.
5.
From the System Configuration Archive (SCA) menu, select SCA Operations,
and press <Enter>.
6.
From the SCA Operations menu, select Remote Filename, and press <Enter>.
This field provides for a 1 to 40 character filename. This filename will be saved to
the TFTP server when an SCA save is performed manually. No extension will be
added to this filename. If an extension is desired, put the dot and extension in the
filename field.
7.
From the SCA Operations menu, begin the SCA save by selecting Perform
TFTP SCA Save, and press <Enter>.
A status screen will provide information about the SCA save, including the state of
the transfer. When the transfer is complete, the status screen will display “SCA
Save Status: Complete”.
8.
Verify that the save was successful
Verification of SCA save can be accomplished by verifying that the SCA filename
appears on the TFTP server after an automatic save is scheduled to occur.
1.3
Follow-up Procedures
Once this procedure is complete, return to the procedure that called out this DLP and
continue with the tasks indicated there.
Perform Steps Below in the Order Listed
