Section 5 DLP-5
TRACER 6000 Series Split System Manual
102
Copyright © 2005 ADTRAN, Inc.
612806320L1-1B
1.
Connect to the TRACER using the 10/100BaseT/TX
MGMT
interface.
If you are not already connected to the unit’s 10/100BaseT/TX
MGMT
port using Telnet client
software, use the procedure in DLP-3,
Setting IP Parameters for the TRACER System
, on page 95 to
connect to the unit.
2.
Press
m
to go to the Main menu
page.
3.
Select the
M
ANAGEMENT
/U
TILITIES
menu and press <
Enter
>.
4.
Select the
F
IRMWARE
U
PGRADE
U
TILITY
menu and press <
Enter
>.
5.
Go to the
F
ILE
X
FER
M
ETHOD
menu and select
TFTP
. The TRACER can use a TFTP server connected
to the same Ethernet network as the local unit or a TFTP server connected to the same Ethernet
network as the remote unit. Make the appropriate selection for your setup (choices are
TFTP-L
OCAL
M
GMT
P
ORT
or
TFTP-R
EMOTE
M
GMT
P
ORT
).
6.
Go to the
TFTP S
ERVER
field and enter the IP address of the network TFTP server.
7.
Go to the
TFTP F
ILENAME
field and enter the filename of the firmware. TRACER firmware files have a
.bin extension. When specifying the filename, include the full path if the firmware file is not located in
the TFTP default location. For example, to use a firmware file in the c:\firmware folder on your local
machine, enter
c:\firmware\myfirmware.bin
into the
TFTP F
ILENAME
field.
8.
Select the
U
PGRADE
D
ESTINATION
. Using TFTP provides the capability to upgrade both sections of the
local and remote units. Valid choices are
L
OCAL
IDU
,
L
OCAL
ODU
,
R
EMOTE
IDU
, and
R
EMOTE
ODU
.
9.
View
C
URRENT
U
PDATE
S
TATUS
to verify the progress of the current firmware update or to identify any
errors encountered during the download.
During the TFTP upload, the following status messages display in
C
URRENT
U
PDATE
S
TATUS
to
indicate the progress of the upload:
Perform the following steps in the order listed.
I
DLE
No active firmware upgrade.
IDU R
ESET
Indicates the firmware file transfer to the IDU is complete and the
system is rebooting to load the new firmware.
U
PGRADE
A
BORTED
Indicates the firmware upgrade was manually aborted by selecting
A
BORT
from the
C
OMMAND
field.
C
ONTACTING
TFTP S
ERVER
Indicates communication with the TFTP network server is trying to be
established with the specified server address in the
TFTP S
ERVER
IP
A
DDRESS
field.
R
EQUESTING
TFTP
OF
F
ILENAME
Indicates the TRACER is requesting TFTP access to the given update
filename and path. Please verify appropriate user rights are selected for
the specified path.
TFTP T
RANSFER
IN
P
ROGRESS
Indicates communication with the TFTP network server has been
established and the update file is being transferred between the
TRACER and the TFTP network server.
U
PGRADE
I
MAGE
IS
V
ALID
Indicates that the system image was verified as a valid image for
the specified update. Before the firmware upgrade begins, the
TRACER verifies that the image is valid. If it is not valid for the system,
U
PGRADE
I
MAGE
IS
I
NVALID
displays.
