TRACER 6000 Series Split System Manual
Section 3 Engineering Guidelines
612806320L1-1B
Copyright © 2005 ADTRAN, Inc.
33
CRAFT Port (DB-9)
The
CRAFT
connector provides a female DB-9 terminal connection (wired as a DCE interface), used for
terminal access to the TRACER system. Table 4 shows the pinout. A null modem cable is necessary for
connecting the
CRAFT
port to a modem for remote dial-up access. Table 5 on page 34 shows the pinout for
a null modem cable.
Table 3. AUX RS232 Pinout
Pin
Name
Source
Description
1
GND
Common
Signal ground
2
RTS
Attached Equipment
Request to send (unused)
3
TXDATA
Attached Equipment
Transmit data (from attached equipment)
4
DSR
TRACER
Data set ready
5
RXDATA
TRACER
Received data (to attached equipment)
6
CTS
TRACER
Clear to send
7
DTR
Attached Equipment
Data terminal ready (unused)
8
CD
TRACER
Carrier detect
Table 4. CRAFT Pinout
Pin
Name
Source
Description
1
CD
TRACER
Carrier detect
2
RXDATA
TRACER
Received data (to attached equipment)
3
TXDATA
Attached Equipment
Transmit data (from attached equipment)
4
DTR
Attached Equipment
Data terminal ready (unused)
5
GND
Common
Signal ground
6
DSR
TRACER
Data set ready
7
RTS
Attached Equipment
Request to send (unused)
8
CTS
TRACER
Clear to send
9
RI
TRACER
Ring indicator (unused)
