Chapter 4. Example Operations
96
TSU 120 User Manual
61200.129L1-1
CONFIGURING THE NETWORK INTERFACE
Place the cursor on 1)NETWORK (NI) with the
number 1 or by scrolling. Activate the Network
Interface Configuration menu with Enter or the
number 1 again.
The unit displays the first two Network (NI) menu
items (see Figure 4-3).
(AMI)
Figure 4-3
First Two Network (NI) Configuration Menu Items
The Code (Item 2) is incorrectly set. To make changes,
scroll down or use number 2 to select the CODE menu
item. Press Enter to move the cursor to the data field
(B8ZS), to the right of 2)CODE.
Pressing 2 again will not move the cursor into the data
field. This helps prevent inadvertent activation of menu
actions.
Scroll down to display AMI and press Enter to set the
line code to AMI (changed from B8ZS). The cursor
moves back to 2)CODE menu position.
Scroll to examine the other Network (NI) items.
Since no other items need to be changed, press Cancel
to exit the Network (NI) menu. The display returns to
the first two Network (NI) menu items (see Figure 4-
4).
Summary of Contents for TSU 120
Page 1: ...TSU 120 PART NUMBER 1200129L1 USER MANUAL 61200 129L1 1A July 1997...
Page 52: ...Chapter 2 Installation 38 TSU 120 User Manual 61200 129L1 1...
Page 132: ...Appendix C System Configuration Charts 118 TSU 120 User Manual 61200 129L1 1...
Page 138: ...Appendix D TSU 120 System Messages 124 TSU 120 User Manual 61200 129L1 1...
