Adtron Total Access 1000, Installation And Maintenance Manual

20

64179008APL1-5A

The LIU Performance Menu provides the user with
present PM statistics (within the last 15 minutes), as
well as PM statistics for the previous 24 hours.
Statistics may be viewed in 15-minute intervals
(previous three hours) or in daily intervals (one 24-hr
period).  An example of the LIU Performance
Monitoring screen is shown in 

Figure 19

.

The LIU Code Upload Menu allows the user to
upgrade the software for the H2LIU.  New software
may be uploaded using the Craft interface or Telnet
connection with Y-modem protocol.

Access Modules

The Access Modules Menu is the gateway to each of
the installed access modules in the Total Access 1000
DAT.  Currently, ADTRAN offers the Quad ADSL
plus POTS Access Module, but is in the process of
developing a single wide Quad ADSL Access Module
and a single wide Quad SHDSL Access Module.
Documentation concerning provisioning of existing
access modules is contained in the following
subsections.

Quad ADSL Access Module

All Access Modules are accessed by logging onto the
Total Access 1000 DAT and selecting the option
corresponding to Access Modules, then selecting the

option corresponding to the appropriate Access
Module.  The Quad ADSL plus POTS Access Module
provides the following menus:

• Configuration

• Provisioning

• Status

• Alarms

• Performance

• ATM Loopback

The ADSL Configuration Menu allows the user to
view general information about the unit including unit
name, part number, CLEI code, and revision numbers.
The ADSL Configuration menu is a read-only display
that is only updated when new software revisions are
installed.

The ADSL Provisioning Menu provides the three
submenus and an option to reset the module to the
factory default settings.  The Line Provisioning
sub-menu provides access to each of the four ADSL
ports on the module.  Each ADSL port is provisioned
separately to accommodate various CPE.  Options
available four each port include Line Service State,
Rate Mode, Data Path Selection, Target Margin,
Minimum Transmit Rate, Minimum Receive Rate, and
Maximum Interleave Delay.  These options should be

Figure 19.  LIU Performance Monitoring Statistics

Total Access 1000 (ATM)

                          15 Minute H2TUR Loop 1 Performance Data

                  Menu                  ES    SES   UAS
                                        000   000   000
             1. Reset Data        13:30 000   000   000
             2. 15 Min Data       13:15 000   000   000
             3. 24 Hr Data        13:00 000   000   000
                                  12:45 000   000   000
                                  12:30 000   000   000
                                  12:15 000   000   000
                                  12:00 000   000   000
                                  11:45 000   000   000
                                  11:30 000   000   000
                                  11:15 000   000   000
                                  11:00 000   000   000
                                  10:45 000   000   000

                             Selection :
                      Next Loop(N)/Previous Loop(P)