31
Congratulations on your new Aduro stove!
To get the best possible experience and benefit from your new Aduro wood burning stove, it is important that
you read the user manual thoroughly before you install the stove and start using it. Errors or incorrect
settings can cause hazardous conditions and/or poor operation.
For further information, please go to
Extended product warranty - free online registry
You have the opportunity to extend the warranty on your wood burning stove from the statutory right of
complaint to an extended warranty of five years. All you need to do is register the stove at
. The deadline for registering is five months from the date of purchase.
Production number
The wood stove has a production number on the rating plate on the back of the stove. For most of our
stoves, the production number is also stamped on the front page of the quick guide that is enclosed with the
stove. For the purposes of the guarantee and for other enquiries, it is important that you are able to quote
this number.
HOW TO SUCCEED WITH YOUR NEW WOOD BURNING STOVE
’s Customer Service Center
you will find tips and tricks on how to
succeed with your new Aduro wood burning stove. Here you will have
direct access to interesting content about maintenance of your stove as
well as support related information.
1. General
1.1 Compliance
The wood burning stove complies with the European Directive Ecodesign 2022, the EN13240 European
standard as well as the NS3058 Norwegian standard and is thereby approved for installation and use in
Europe. At the same time, the manufacturing process is subject to external quality control. DoC (Declaration
of Conformity) can be downloaded at
1.2 Transportation
When taking your wood burning stove home, please ensure that it travels in an upright position. If you wish
to lay it flat, it is important that you remove all loose parts from the combustion chamber (cast iron grate,
baffle plates, and insulation tiles) and remove the ashpan. Otherwise, you can leave the insulation tiles and
the cast iron grate in the combustion chamber and then fill it up with surplus packaging to secure the loose
parts.
EN
