35
Do not install the stove in the following ways:
3. Lighting the stove
Important safety information
•
The wood burning stove will become warm during use and therefore it should be treated with all
necessary caution.
•
Never keep easily combustible fluids such as petrol in the vicinity of the wood burning stove.
•
Never use easily combustible fluids to light the fire in the wood burning stove.
•
When lighting a fire, it is important to get the fire burning fast. If the fire does not start quickly and
wood only smoulders, it can cause strong smoke formation and in worst case cause an explosive
ignition of the flue gasses, which can damage the stove.
•
Never empty the ashpan when the wood burning stove is warm. Embers may still be found in the
ashpan for up to 24 hours after the fire has gone out. Please wait to empty the ashpan until you
are sure that there are no embers in the ash.
•
The door should be kept closed while the wood burning stove is in use. While lighting the fire, the
door can stand ajar for the first few minutes.
•
In the event of a chimney fire: Close all the dampers on the wood burning stove and call the fire-
fighting service.
3.1 Damper
The stove is equipped with a damper under the door, which regulates the combustion air: primary,
secondary, and tertiary air supply. The primary air is used at the beginning to get the fire going, the
secondary air keeps the fire burning evenly, and the tertiary air ensures that flue gasses are burned. You
must always add secondary and tertiary air, while firing the stove.
With air intake upwards:
Through a damp
crawl space:
If the air is drawn from a damp crawl
space, you won
’t achieve an optimum air
intake.
If the air intake is turned upwards,
there will be too much resistance for
the air intake.
