Heat rating in buildings with
- Optimum insulation
- Average insulation
- Inadequate insulation
150 m
2
100 m
2
60 m
2
Electrical connection
230V / 50Hz
Pellet container capacity
Approx. 15 kg
1.4 Transportation
When taking your Aduro H1 & H3 LUX home, please ensure that it travels in an upright position. The
packaging must be disposed according to national rules regarding disposal of waste.
2. Installation of the Aduro H1 & H3 LUX
You are welcome to install your Aduro H1 & H3 LUX yourself
– but we strongly recommend that you consult
your chimney sweep before you begin the installation. Your dealer can also provide you with installation
advice. It is important to ensure that all local rules and regulations, including ones relating to national and
European standards, are complied with when installing this device. Further, it is important to ensure that the
fireproof tiles and the exhaust deflector in steel is placed correctly. Remember, it is your responsibility that
rules in force are complied with.
2.1 Position of the hybrid stove/distance requirements
The new Aduro H1 & H3 LUX must be installed in a suitable and physically possible position. You need to be
sure that the position complies with local regulations. Distance requirements will only apply if the Aduro H1 &
H3 LUX is to be placed close to flammable materials:
Distance to flammable material (see also illustration below)
Behind the stove
To the sides of the stove
To furniture
15 cm
65 cm
87.5 cm
You may not begin to use the Aduro H1 & H3 LUX until it has been inspected
and approved by your local chimney sweep.
Summary of Contents for EN13240
Page 25: ...25 9 Pr vningsattest...