Version 1
Congratulations on your new Aduro Pellet Stove!
To get the best possible experience and benefit from your new Aduro Pellet Stove, it is important that you
read the user manual thoroughly before you install the stove and start using it. Errors or incorrect settings
can cause hazardous conditions and/or poor operation.
For further information, please go to
At the back of the stove, you can find the production number and serial number (UUID). We recommend that
you note down these numbers in the box below before mounting the stove. For the purposes of the warranty
and for other enquiries, it is important that you can quote the production number as well as the serial
number.
Production number:
UUID number:
General information
•
ATTENTION! This stove operates exclusively on pellets: DO NOT USE OTHER FUELS: any
other material that may be burnt will result in failure and malfunction of the stove.
•
Clean the brazier on a regular basis upon every ignition or pellet refuelling.
•
Accumulated and
unburned pellets in the brazier after “failed start-up” or alarms must be removed
before lighting again. Check that the cave is clean and positioned properly before lighting again.
•
We recommend that the installation and connection is carried out by an authorized service partner in
compliance with local regulation, national and European standards and with the annexed installation
instructions.
•
The pellet stove operates exclusively with wood pellets complying with the standards DIN plus or EN
plus 14961-2 A1 or PEFC/04-31-0220 or ONORM M7135.
Right of complaint
In accordance with the Danish Sale of Goods Act, the right to claim is valid for two years from the date of
purchase of the stove. Receipt with date is valid as proof.
All pellet stoves may require adjustment of combustion air and auger speed in order to optimize the function
and in order to reach an effective and clean combustion. Aduro and our service partners can monitor and
adjust stoves in the Aduro Cloud. However, it is only possible if the stove is connected to the cloud via Wi-Fi.
Aduro can therefore not treat complaints regarding function and combustion if the stove is not online.
For further information regarding complaints please go to
Installation
You are allowed to install the stove yourself, but we strongly recommend that you consult your chimney
sweeper before you begin the installation. It is important to ensure that the installation of the stove is in
compliance with all local rules and regulations, including the ones relating to national and European
standards. Your dealer can also provide you with installation advice. Remember, it is your responsibility that
rules in force are complied with.
EN
