background image

8

9098827000(2)2010-12

SC3000 26” Disc / 28” Cyl.

ENGLISH

INSTRUCTIONS FOR USE

STEERING WHEEL WITH CONTROL PANEL

Reverse gear activation/deactivation lever

51. 

Reverse gear LED indicator

52. 

Detergent fl ow control switch (*)

53. 

Washing detergent fl ow control switch LED indicator (*)

54. 

Mute function switch

55. 

Mute function switch LED

56. 

Horn switch

57. 

Ignition key

58. 

Solution fl ow increase switch

59. 

Solution fl ow decrease switch

60. 

Solution fl ow indicator

61. 

Battery warning lights

62. 

Green warning light - charged battery

• 

Yellow warning light - semi-discharged battery

• 

Red warning light - discharged battery

• 
Vacuum system switch

63. 

Vacuum system LED indicator

64. 

Extra pressure switch (the switch is enabled on 28” Cyl. 

65. 

version only)
Extra pressure LED indicator

66. 

Brush/pad-holder deck and squeegee lifting/lowering 

67. 

switch
Brush/pad-holder deck and squeegee lifting/lowering LED 

68. 

indicator

EcoFlex™ activation/deactivation lever (*)

69. 

EcoFlex™ system LED indicator (*):

70. 

LED on - EcoFlex™ system on

• 

LED fl ashing - EcoFlex™ system override

• 

LED off - EcoFlex™ system disabled

• 
Hour counter and solution level display:

71. 

When the machine is started, it displays for a few 

• 

seconds the number of working hours which have been 
performed.
While using the machine, it displays the solution/

• 

washing water level in the tank (in gallons).
When the level is above 18 USgal, the display indicates 

• 

“FUL”.
When the level is under 4 USgal, the display indicates 

• 

“LO”.
When the tank is almost empty, “LO” starts fl ashing.

• 

NOTE

The display could indicate “LO” even if the tank is 
not completely empty, thus allowing to complete 
the cleaning cycle; in any case, it is recommended 
to check the actual solution fl ow supplied to the 
brushes.

Anti-skid control activation LED indicator

72. 

Only for machines with EcoFlex™ system

(*) 

52

54

53

56

55

51

57

58

59

60

72

70

71

68

67

65

69

66

63

64

62

61

P100360

Summary of Contents for 9087266020





















Reviews: