ENGLISH
SERVICE MANUAL
8
9096982000(2)2009-06
Adinity™ 17 ST / 20 ST / 20 D / X 20 D / X 20 C / X 24 D
GENERAL INFORMATION
TECHNICAL DATA (For Adinity™ 17 ST, 20 ST)
Model
Adinity™ 17 ST
(1 brush/pad-holder)
Adinity™ 20 ST
(1 brush/pad-holder)
Machine height
41.6 in (1,058.5 mm)
Solution/clean water tank capacity
10.5 gal (40 litres)
Recovery water tank capacity
10.5 gal (40 litres)
Min/max solution low
0 ÷ 0,42 gal/min (0 ÷ 1,6 lt/min)
Solution/clean water autonomy
0.29 gal/min (1,1 lt/min) ~ 36 min Media/Average
Front wheel diameter
7.8 in (200 mm)
Front wheel speciic pressure on the ground *
174 lbf/in2 (1.2 N/mm2)
Rear wheel speciic pressure on the ground *
435 lbf/in2 (3 N/mm2)
Rear wheel diameter
3.9 in (100 mm)
Minimum turning radius
23,6 in (600 mm)
25,6 in (650 mm)
Vacuum system motor power
0.44 hp (330 W)
Working gradeability
2% - 1°
Sound pressure level (at the operator’s position)
(ISO 11201, ISO 4871) (LpA)
66 dB(A) ± 3dB(A)
Sound pressure level (to the machine)
(ISO 3744, ISO 4871) (LwA)
84 dB(A)
Vibration level at the operator’s arms (ISO 5349-1)
< 98,4 in/s
2
(< 2.5 m/s
2
)
Standard batteries
WET (2 x 12V) 24V 105 Ah
Standard batteries autonomy
~ 3,2h
Battery compartment size (width x length x height)
13.8 x 13.8 x 11.8 in (350 x 350 x 300 mm)
Total consumption in work condition
29 A
Vacuum system circuit capacity
41.5 in H2O (1,055 mm H2O)
Cleaning width
18.0 in (450 mm)
21.0 in (530 mm)
Squeegee width
30.0 in (760 mm)
Machine maximum length
46.8 in (1,190 mm)
48.3 in (1,228 mm)
Machine width without squeegee
20.1 in (512 mm)
21.2 in (540.8 mm)
Brush diameter
18.0 in (450 mm)
21.0 in (530 mm)
Deck right/left offset
1,5/- in (37,1/- mm)
3/- in (75,9/- mm)
Brush distance from the ground (when lifted)
2,4 in (60,1 mm)
Weight without batteries and with empty tanks
194.0 lb (88 kg)
Maximum weight with batteries and full tanks
479.6 lb (218 kg)
Brush motor power
0.65 hp (480 W)
Brush speed
153 rpm
Brush/pad-holder pressure
42.0 lb (19.0 kg)
45.1 lb (20.5 kg)
Brush/pad-holder pressure with extra-pressure function turned on (optional)
57,9 lb (26,3 kg)
61,6 lb (27,8 kg)
(*) Machine test have been performed under the following conditions:
Battery maximum size
•
Brush and squeegee maximum size
•
Full clean water tank
•
Optional equipment installed
•
Wheel weight checked
•
Each wheel print checked on cement
•
Result expressed as maximum value for both front and rear wheels
•
Summary of Contents for Adinity 17ST
Page 2: ......
