FORM NO. 041410 / HYDRO-RETRIEVER 2067 -
23
MAINTENANCE
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
HYDRAULIC OIL
The hydraulic oil tank is located under the operator’s seat. Remove the cap from the tank and look to the bottom of the filler screen. If the oil level
is below the bottom of the filler screen, add SAE 10W-30 motor oil until the bottom of the filler screen is covered. Change the oil if major contamination
from a mechanical failure occurs.
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ENGINE OIL
Check the engine oil level when the machine is parked on a level surface and the engine is cool. Change the engine oil after the first 35 hours of
operation and every 100 hours after that. Use 3.5 quarts (3.3 liters) of 10W-30 motor oil (API service SG-SF). Replace the oil filter with every oil
change.
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ENGINE COOLANT
Lift the engine cover and allow the engine to cool completely. Then remove the cap from the radiator. If coolant is not visible at the bottom of the
filler neck, add a mixture of half water and half automotive type anti-freeze.
