FORM NO. 041410 / HYDRO-RETRIEVER 2067 -
3
INTRODUCTION
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
UN-CRATING
Upon delivery, carefully inspect the shipping crate and the machine for damage. If damage is evident, save all parts of the shipping crate so that they
can be inspected by the trucking company that delivered the machine. Contact the trucking company immediately to file a freight damage claim.
1
After removing the crate, remove the wooden blocks next to the wheels.
2
Check the engine oil and coolant levels.
3
Check the hydraulic oil level.
4
Read the instructions in the Preparing the Machine For Use section of this manual, then fill the fuel tank.
6
Place a ramp next to the front end of the pallet.
7
Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the machine
forward down the ramp to the floor. Keep your foot lightly on the brake pedal until the machine is off the pallet.
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
CAUTION!
Use extreme CAUTION when operating this machine. Be certain that you are thoroughly familiar with all operating instructions before
using this machine. If you have any questions, contact your supervisor or your local Advance Industrial Dealer.
If the machine malfunctions, do not try to correct the problem unless your supervisor directs you to do so. Have a qualified company
mechanic or an authorized Advance Dealer service person make any necessary corrections to the equipment.
Use extreme care when working on this machine. Loose clothing, long hair, and jewelry can get caught in moving parts. Turn the Key
Ignition Switch OFF and remove the key before servicing the machine. Use good common sense, practice good safety habits and pay
attention to the yellow decals on this machine.