ENGLISH
INSTRUCTIONS FOR USE
2
SC100 - 107408645
11/2015
INTRODUCTION
NOTE
The numbers in brackets refer to the components
shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all
necessary information to use the machine properly, in a safe
and autonomous way. It contains information about technical
data, safety, operation, storage, maintenance, spare parts and
disposal.
Before performing any procedure on the machine, read this
Manual carefully. Contact Advance in case of doubts concerning
the interpretation of the instructions and for any further
information.
Keep the manual in the appropriate envelope for future use or in
case of resale of the equipment.
TARGET
This Manual is intended for operators and technicians qualiied
to perform the machine maintenance.
Users must not perform procedures reserved for qualiied
technicians. Advance will not be answerable for damages
coming from the non-observance of this prohibition.
IDENTIFICATION DATA
The machine serial number and model name are marked on the
plate (28).
Product number and year of production are marked on the same
plate.
This information is useful when requiring machine spare parts.
Use the following table to write down the machine identiication
data.
MACHINE model ....................................................................
PRODUCT code .....................................................................
MACHINE serial number ........................................................
OTHER REFERENCE MANUALS
–
Service Manual (that can be consulted at Advance Service
Centers)
–
Spare Parts List (supplied with the machine)
SPARE PARTS AND MAINTENANCE
Any repair procedure must be performed by qualiied personnel
or by Advance Service Centers.
Only original spare parts and accessories must be used.
Contact Advance for service or to order spare parts and
accessories, specifying the machine model, product code and
serial number.
CHANGES AND IMPROVEMENTS
Advance constantly improves its products and reserves the right
to make changes and improvements at its discretion without
being obliged to apply such beneits to the machines that were
previously sold.
Any change and/or addition of accessory must be approved and
performed by Advance.
MACHINE FUNCTIONS
This scrubber-dryer has been designed and built for commercial
use and for cleaning (scrubbing and drying) smooth and
compact loors.
The scrubber-dryer can be used on carpet when carpet
accessories are installed.
CONVENTIONS
Forward, backward, front, rear, left or right are intended with
reference to the operator’s position when in use.
UNPACKING/DELIVERY
When the machine is delivered, check that the packing and the
machine were not damaged during transportation.
In case of visible damages, keep the packing and have
it checked by the carrier that delivered it. Call the carrier
immediately to ill in a damage claim.
CAUTION!
After unpacking, carefully assemble the machine
according to the instructions sheet inside the
packaging.
Please check that the following items have been supplied with
the machine:
–
Technical documents:
•
Scrubber-dryer Instructions for use Manual
•
Scrubber-dryer Spare Parts List
WARNING!
The Products sold with this Manual contain or
may contain chemicals that are known to certain
governments (such as the State of California,
as identiied in its Proposition 65 Regulatory
Warning Law) to cause cancer, birth defects or
other reproductive harm. In certain locations
(including the State of California) purchasers
of these Products that place them in service at
an employment job site or a publicly accessible
space are required by regulation to make certain
notices, warnings or disclosures regarding the
chemicals that are or may be contained in the
Products at or about such work sites. It is the
purchaser’s responsibility to know the content
of, and to comply with, any laws and regulations
relating to the use of these Products in such
environments. The Manufacturer disclaims
any responsibility to advise purchasers of any
speciic requirements that may be applicable to
the use of the Products in such environments.
SAFETY
The following symbols indicate potentially dangerous situations.
Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator’s cooperation is essential in order to prevent
injury. No accident prevention program is effective without the
total cooperation of the person responsible for the machine
operation. Most of the accidents are caused by failure to comply
with the simplest rules for exercising prudence.
VISIBLE SYMBOLS ON THE MACHINE
2%
WARNING!
Do not use the machine on slopes with
a gradient exceeding the speciication.
