ACR3901U-S1 – Reference Manual
info@acs.com.hk
Version 1.09
www.acs.com.hk
Page 89 of 96
7.2.9. Memory Card – AT88SC101/AT88SC102/AT88SC1003
7.2.9.1.
SELECT_CARD_TYPE
This command powers down and up the selected card that is inserted in the card reader and performs
a card reset.
Note: This command can only be used after the logical smart card reader communication has been
established using the SCardConnect() API. For details of SCardConnect() API, please refer to PC/SC
specifications.
Command Format (
abData
field in the
PC_to_RDR_XfrBlock
)
Pseudo-APDU
CLA
INS
P1
P2
Lc
Card Type
FFh
A4h
00h
00h
01h
09h
Response Data Format (
abData
field in the
RDR_to_PC_DataBlock
)
SW1
SW2
Where:
SW1 SW2
= 90 00h if no error
7.2.9.2.
READ_MEMORY_CARD
Command Format (
abData
field in the
PC_to_RDR_XfrBlock
)
Pseudo-APDU
CLA
INS
P1
Byte Address
MEM_L
FFh
B0h
00h
Where:
Byte Address
= Memory address location of the memory card
MEM_L
Length of data to be read from the memory card
Response Data Format (
abData
field in the
RDR_to_PC_DataBlock
)
BYTE 1
…
…
BYTE N
SW1
SW2
Where:
BYTE x
Data read from memory card
SW1 SW2
= 90 00h if no error
7.2.9.3.
WRITE_MEMORY_CARD
This command is used to write data to the specified address of the inserted card. The byte is written
to the card with LSB first, i.e., the bit at card address 0 is regarded as the LSB of byte 0.
The byte at the specified card address is not erased prior to the write operation and, hence, memory
