MAZDA 2014- 9
2014 Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
IT’S VERY IMPORTANT TO PERFORM THIS STEP!
UNTIL EACH PROX STARTS THE VEHICLE
THEY WILL NOT OPERATE PROPERLY.
KEYS PROGRAMMED: 2
PRESS THE START / STOP
BUTTON TO SWITCH THE IGNITION
OFF
PROGRAM PROX
THE SCREEN SHOULD NOW DISPLAY
KEYS PROGRAMMED: 2
AND
ASK YOU TO TURN THE IGNITION OFF
TO COMPLETE THE PROCEDURE
START THE ENGINE WHILE HOLDING
EACH PROX UP TO THE START / STOP
BUTTON
PROGRAM PROX
PRESS ENTER KEY
MVP &
TCODE
MAZDA 2014
ADVANCED DIAGNOSTICS USA
powered
by
CLEAR PROGRAM PROX PROCEDURE
CONTINUED’
ADD PROX PROCEDURE
The ADD PROX procedure is essentially the same as the CLEAR PROGRAM PROCEDURE
EXCEPT it does not ERASE any previously programmed PROX and only programs 1 NEW Prox.
IMPORTANT:
Before ADDING a PROX make sure you have at least one of the 2 already working PROX available.
This is because of the way MAZDA designed the system.
Remember, before any PROX that has been added will work properly the engine MUST be started with
TWO prox keys.
If you ADD a Prox but DO NOT have the other PROX available the new prox will work and start the engine
but only by holding it up to the start / stop button.
The process can be completed later by starting the engine with the other prox but this is something to
be aware of as your customer will likely NOT be happy until everything works as designed.
IF FOR ANY REASON 2 PROX DID NOT SUCCESSFULLY PROGRAM REPEAT THE PROCESS
OF HOLDING UP THE PROX SHOWN ON THE PREVIOUS PAGE UNTIL BOTH PROX OPERATE
AND START THE ENGINE.