HARDWARE DESCRIPTION
This module is compliant with the Ethernet
®
IP standard, and supports 10/100Mbit, full or half
duplex operation.
Link/activity port 2
Link/activity port 1
Network status
RJ-45 connectors
Module status
Figure 1. Hardware
Table 1. Network status LED
LED State
Description
Off
No IP address or no power
Green
Online, one or more connections established (CIP Class 1 or 3)
Green, blinking
Online, no connections established
Red
IP address conflict detected, fatal error
Red, blinking
One or more connections timed out (CIP Class 1 or 3)
Table 2. Module status LED
LED State
Description
Off
No power
Green
Controlled by a scanner in Run state
Green, blinking
Not configured, or scanner in Idle state
Red
Major fault (for example, exception state or fatal error)
Red, blinking
Recoverable fault(s). Module is configured, but stored parameters
differ from currently used parameters.
If both the network status LED and the module status LED are red, a fatal error has occurred.
Table 3. Link/activity LED
LED State
Description
Off
No link, no activity
Advanced Energy
®
Thyro-PX
™
Anybus
®
Ethernet IP
57010163-00A
Thyro-PX
™
Anybus
®
Ethernet IP
2
