A D V A N C E D H O M E C A R E
C
OPYRIGHTED
A
DVANCED HOME CARE
,
INC
.
2010
8
Step 3:
Attach the portable unit to the stationary reservoir at the
filling connectors. Center the portable unit connector over the
reservoir connector.
Step 4:
Lower the unit into the shaped recess or onto the
connector. Once the unit is resting on the connector, hold down
firmly until the filling process is complete.
Step 5:
Open the fill valve by pulling the fill lever down on the back
of your portable unit. This will start the filling process.
About 30
seconds into the filling process, close and the vent lever one or
more times to break up any ice that may began to form around
the valve stem. This will help prevent the vent valve from freezing
open.
As the unit is filling, you will hear a hissing noise. When the
unit is full, the hissing noise will change and you will see a small
cloud of white vapor at the connection. Always remain with the
units while filling.