ENGLISH
START 16 Series
| User manual
4
5
User manual
|
START 16 Series
Series
1
|
INTRODUCTION
Thank you for choosing a
A.N.T
–
Advanced Native Technologies
– product!
In our
START 16
“PLL Diversity” wireless systems we have put our passion and
our technological background gained over the years, to offer products that meet
your needs, maintaining the quality over time.
START 16
wireless systems operate in UHF band with 16 channels (frequencies).
You may choose the operating frequency via buttons or via infrared using ASC
feature.
Both versions of
START 16R
receivers adopt Diversity technology. They are
equipped with two discrete antennas A and B, which are used to select at any
moment the best radio signal. The antennas are fixed on the front panel of the
receiver, but may be placed in an horizontal position by means of a junction
present at their base.
Please, dedicate some minutes to read this instruction manual in order to quickly achieve
the best performances from this product.
For safety precautions, warranty and disposal, please refer to attached Section 2.
For further information about all
A.N.T
products catalog, please visit our website:
www.ant-intomusic.com
2
|
DESCRIPTION
1
2
3
7
4
6
5
8 9
10
FRONT PANEL
2.1
|
RECEIVER - START 16R
1 POWER
Press this button on receiver front panel for 1” to turn ON/OFF the unit.
2 AF LEVEL METER
It shows the audio signal level. Avoid that the red LED (the rightmost one)
remains lit continuously.
3 ASC
Press this button to achieve automatic channel (frequency) synchronization
via infrared.
4 IR WINDOW
It allows the synchronization of the channel (frequency) with the transmitter.
After pressing the ASC button, place the handheld microphone or beltpack
transmitter close to this window and wait for the selected channel to stop
flashing on the display. After the synchronization, the receiver’s display is
lit steadily on the selected channel (frequency).
5 DISPLAY
It shows the number of the activated channel.
6 UP
Press this button to scroll and select channel number in ascending mode
from 01 to 16.
7 DOWN
Press this button to scroll and select channel number in descending mode
from 16 to 01.
8 ANTENNA A
This LED turns on automatically when the unit is receiving a better signal
from the antenna A.
9 ANTENNA B
This LED turns on automatically when the unit is receiving a better signal
from the antenna B.
10 VOLUME
It adjusts the output audio level.
11 ANTENNAS
For the best signal reception, please place the antennas in a vertical position.
11
