H.
HOW TO: PAIR A REMOTE TO A MOTOR OR RE-SYNCHRONIZE A MOTOR AND REMOTE THAT
HAVE BECOME DELINKED
1.
DISCONNECT THE POWER FROM THE MOTOR; UNPLUG IF IT IS PLUGGED IN OR TURN OFF
BREAKER IF THE MOTOR IS HARD-WIRED.
2.
PRESS & HOLD THE UP BUTTON UNTIL THE LIGHT ON THE REMOTE GOES SOLID.
3.
WHILE CONTINUING TO HOLD DOWN THE UP BUTTON, TURN THE POWER BACK ON TO THE
MOTOR: PLUG IT BACK IN IF PLUGGED, TURN ON BREAKER IF HARD WIRED
4.
RELEASE THE UP BUTTON AND THEN IMMEDIATELY PRESS & RELEASE THE UP BUTTON
ONCE.
I.
HOW TO: RESET MOTOR & REMOTE; DECOUPLE REMOTE FROM MOTOR; DELETE
PROGRAMMING
1.
PRESS AND HOLD THE STOP BUTTON. THE MOTOR WILL JOG OR BEEP 5 TIMES. RELEASE
THE STOP BUTTON.
2.
TURN TO THE BACK OF THE REMOTE AND USING A PAPER CLIP/TOOTH PICK/PIN PRESS
THE PROGRAM BUTTON, THE MOTOR WILL JOG OR BEEP 3 TIMES TO CONFIRM THAT
PROGRAMMING HAS BEEN DELETED.
