Advanced Solutions MOBILMAX, User Manual

5

6

7

1

2

4

3

8

45 cm

55 cm

33

IMPORTANT: ONCE WORK IS COMPLETE, LEAVE 

THE IRONING TABLE IN HEATING MODE FOR 

10/15 MINUTES.

BEFORE CLOSING, COOL THE SURFACE 

USING THE SUCTION, USE SWITCH “11”. THIS 

OPERATION GUARANTEES LONG LIFE TO YOUR 

IRONING TABLE BY REMOVING ANY POSSIBLE 

WATER RESIDUES COMPLETELY.

BEFORE CLOSING THE FURNITURE, TURN THE 

BOARD OFF USING THE GENERAL SWITCH “10”.

DISCONNECT THE IRON FROM THE POWER 

SUPPLY “13” AND THEN DISCONNECT THE 

POWER CABLE “12”.

FIRST USE

2

ND

 PHASE: STARTING UP

•  Insert the plug of your iron into the “13” socket located under the 

ironing board;

•  Connect the power cord of the cabinet “12” to a 220 Volts socket 

equipped with an earthed socket;

•  Select the “0” position of the green switch “11”;
•  Turn on the red main switch “10” and wait a few minutes before 

the table warms up;

•  Suction: place the iron over the “14” button (black fabric area), 

select the “I” position of the switch green “11”, when you lift the 
iron the suction will be automatically activated;

•  Blowing: select the “II” position of the green switch “11”.

1

ST

 PHASE: OPENING

•  Open the rear door (1) and press the locking foot (2);
•  Open the boiler door and place it over the door back (3);
•  Open the front door (4);
•  Lift the ironing board (5), position the front door in the 

appropriate seat (6), place the ironing board on the door (7) 
and press the locking foot (8).

To move the furniture, push it from the 

narrow side