Advanced Solutions MOBILMAX, User Manual

5

We recommend cleaning the boiler at least once a year to preserve the performance of your boiler over time ironing 

system. Do not use detergents. If you want to do it yourself, you can use a descaling agent that is non-toxic and / or 

harmful to ironing systems, authorized by the manufacturer according to the instructions prescribed.
1.  Always make sure that the boiler is no longer under pressure before unscrewing the boiler’s underfloor drain 

plug.

2.  Make sure that the plug is not inserted into the socket.
3.  Empty the tank by removing the cap “2” from the water.
4.  Unscrew the underfloor drain plug “13” and empty the boiler water into a container.
5.  To remove limescale from the boiler, rinse it several times until the water is clean.
6.  For an optimal cleaning of the boiler, dilute the descaling agent in ½ liter of water and pour the solution inside the 

boiler through the underbody drain plug “13”.

7.  Close the cap and let it sit for about 1 hour with the appliance in operating position but disconnected and cold.
8.  Unscrew the underfloor drain plug “13” and overturn the entire contents of the boiler in a container, taking care to 

rinse with clean water for at least 4 times.

9.  Close the underfloor drain plug “13”.

WARNING: NEVER USE THE APPLIANCE WHILE THE DECALCIFYING SOLUTION IS PRESENT IN 

THE BOILER. THE NON-OBSERVANCE OF THIS PROCEDURE NULLIFIES THE WARRANTY.

5

This appliance is able to generate steam in a vertical position so you can steam fabrics and easily restore them.
1. Place the knob of the iron thermostat “4” at the maximum capacity at the end of the word “linen”.
2. Hang the dress on the hanger, holding it lightly with your hand.
3. Pass the iron from top to bottom and press the steam button.

ATTENTION: FOR COTTON AND LINEN, IT IS ADVISABLE TO PLACE THE PLATE IN CONTACT 

WITH THE FABRIC, WHILE FOR THE MOST DELICATE GARMENTS, IT IS RECOMMENDED TO 

KEEP THE PLATE A FEW CENTIMETRES AWAY.

VERTICAL IRONING

USEFUL TIPS

CLEANING AND REMOVING LIMESTONE FROM THE BOILER

•  It is advisable to divide the garments according to the temperatures indicated on the nameplate. Start ironing 

with products that require low temperatures.

•  Keep the iron plate clean; clean it when it is cold with a damp cloth. Do not clean the iron plate with descaling 

products if not authorized by the manufacturer. Avoid contact of the plate with zippers, hooks, rings, etc.

•  Place the iron on the appropriate mat after use. Make sure the plate is cold, the remainder of drops of water can 

cause stains to form.

•  After switching off, make sure that the iron plate has cooled down and then store the appliance in a dry place.

IMPORTANT: BEFORE YOU BEGIN, MAKE SURE THAT THE FABRIC TO BE IRONED IS SUITABLE 

FOR STEAM IRONING: READ THE WARNINGS ON THE CLOTHING LABEL!