66
SAFETY NORMS AND PRECAUTIONS
•
Before use, check that the mains voltage corresponds to that indicated on the nameplate below the ironing
system.
•
Only connect the appliance to a power outlet that matches the rating plate data and is equipped with an efficient
one grounding.
•
In case of incompatibility between the socket and the plug of the appliance, have the plug replaced with the
other suitable type, by professionally qualified personnel.
•
The electrical safety of this appliance is only guaranteed when the appliance is correctly installed connected
to an efficient earthing system as required by current electrical safety standards. The Manufacturer declines
all responsibility for damage caused by inadequate earthing of the system. In case of doubt, contact qualified
technical personnel.
•
Do not leave the appliance containing water in an environment with cold temperatures. After removing the
packaging check that the appliance is complete and not damaged. If in doubt, do not use the appliance e
contact an authorized center.
•
Avoid using current adapters, multiple sockets, extension cords. In case it is necessary to use one of these
elements, make sure that they comply with the safety directives and the safety limit indicated in the appliance
plate (do not exceed the declared maximum capacity).
•
Do not keep the packaging (plastic bags, expanded polystyrene etc.) within the reach of children: this way
accidents are avoided.
•
This appliance should only be used for domestic use. Any other use is to be considered improper and therefore
dangerous.
•
The manufacturer is not liable for damages due to improper use or for non-compliant repairs carried out by
unqualified personnel.
•
Do not touch the appliance with wet hands or feet.
•
Do not use the appliance in a bathroom.
•
Do not remove the plug from the socket by pulling the power cord.
•
Do not leave the appliance in an open place, exposed to atmospheric agents such as rain, sun, frost, etc.
•
Do not allow the appliance to be used by children or incapacitated persons.
•
Do not immerse the appliance in water.
•
Before carrying out any cleaning or maintenance operation, disconnect the appliance from the mains power
supply, by unplugging.
•
In case of failure or malfunction of the appliance, switch it off and do not tamper with it. For any repairs, contact
only and a Technical Assistance Center authorized by the manufacturer and request the use of original spare
parts.
Non-observance of the items above may compromise appliance safety.
•
When you decide to permanently remove the appliance, after disconnecting the plug from the mains supply
power supply, it is recommended to make it unusable by cutting the power cord.
•
The power cord of this appliance must not be replaced by the user as the replacement requires the use of
special tools.
•
In case of damage to the cable, or to replace it, contact only one center Assistance authorized by the
manufacturer.
•
Avoid directing the steam jet on people and / or animals as extremely dangerous.
•
Noises due to normal may be heard during the heating and / or cooling phase of the boiler dilatation of the metal
with which this is achieved.
•
Do not place the ironing system directly under a tap to add water.
•
Avoid contact between the hot plate and the cables.
•
In case of intervention of the thermo-limiting safety device, the appliance stops working. To restore the normal
operation, the appliance must be entrusted to qualified personnel.
•
Avoid using iron on fabrics that are too wet.
•
Do not fill the tank more than necessary and do not mix the water with stain removers, perfumes or similar.
•
The user must not leave the appliance unattended when it is connected to the power supply.
•
Disconnect the mains plug and switch off the main switch when the appliance is not on used.
•
Do not leave the appliance unnecessarily inserted.
•
The control unit must not be moved during operation and must be positioned on a surface flat particularly
resistant to high temperatures.
•
In the event of a fall of the ironing system with consequent visible breakage of the appliance (boiler or iron),
avoid re-use by bringing the appliance to a Service Center for repairs.
•
The ironing system should not be used if there are visible damage or leakage. Before using the appliance
again, contact the qualified Service Centre.
•
In case of leakage or loss of steam from the safety valve placed under the iron, it is necessary contact an
authorized Service Center to have the integrity checked even if the appliance continues to work regularly.
•
Keep these instructions carefully for further consultation.
•
This appliance complies with the EEC directive EN 55014 on radio interference suppression.
Summary of Contents for MOBILMAX
Page 1: ...MOBILMAX USE MANUAL LANGUAGE IT ISTRUCTION PROFESSIONAL IRONING FURNITURE EN ...
Page 2: ......
Page 11: ......
Page 12: ...10 ...