Advanced Solutions MOBILMAX, User Manual

77

TROUBLESHOOTING

Sometimes problems arise from causes which can be easily removed by carrying out simple checks.

PROBLEM

CAUSE

SOLUTION

Ironing board does not heat up

• General switch “10” is off

• Lack of voltage at the socket.

• General switch “10” is switched off

• Turn on the “10” switch

• Check the operation of the socket with 

another appliance

The board motor does not work

• “11” vacuum / blowing switch turned 

off

• Lack of voltage at the outlet current

• The iron presses on button “14”.

• Turn on the “10” switch

• Turn on the “11” switch suction / blowing

• Check the operation of the taken with 

another appliance

• Lift the iron from the table from the 

ironing board

The ironing motor stays in 

operation

The iron does not press on the

“14” button.

Position the iron above button “14”.

The iron does not heat up

• The iron button “6” is off

• The thermostat knob on the iron “4” is 

in the “off” position

• There is no voltage at the socket

• Turn on the “6” button

• Turn the knob to the position desired

• Check the operation of the socket with 

another appliance

The iron warms but pressing the

“11” steam button does not come 

out steam or it comes out little

• The water tank is empty

• The boiler is clogged with limestone

• Fill the tank with water continuous 

recharge.

• Descale the boiler following the specific 

instructions.

The iron plate drips

• The thermostat knob on the iron “4” 

is not positioned in the “zone vapor”

• Condensation formation

• Turn the knob to the position correct

• A few drops of water at the beginning of 

ironing is normal

The iron stains fabrics

Perfumes have been added to the 

water or additives

Rinse tank and boiler and use always 

and only tap water e distilled water of 

sure origin

Coloured fabrics become shiny

• Ironing mode not appropriate

• The boiler is clogged with limestone

• Check the correct label on the label 

ironing temperature

• Iron the garments from inside or interpose 

one cloth between them and the iron

f, after carrying out these checks, the appliance does not work, please contact the Technical Assistance 

Service.

IR

ONING T

ABLE

B

UIL

T-IN IR

ON