Advanced Telemetry Systems, Inc. R4500S Reference User Manual R05-11-A
46
To stop the Stationary Scan, press
“ESC”
. This will return the screen to the Program Menu.
If you desire to start the stationary scan after stopping the scan, a new window will appear when entering the
Stationary Menu.
Pressing
“ENTER”
while the cursor is on
Scan Using Defaults Scan
, the Stationary Scan will start up with the
values entered in the Stationary Default Menu.
If any of the scan protocol values need to be changed, you will need to move the cursor to
New Scan
and press
“ENTER”
. The values in the list will show the default values. Change and enter the value you want to use for this
one time scan only. If you want the values to be remembered for future scans go back to the default menu and
make the changes there.