background image

k

Set-up optional at control panel ........................................................................................47

Facials ..........................................................................................................................47
Body cooling in the top canopy ....................................................................................47
Body cooling in the sunbed ..........................................................................................47
AC unit .........................................................................................................................47
Starting a tanning session ...................................................................................... 47-48
Stopping a tanning session ..........................................................................................48
Starting SunFresh option .............................................................................................48
Starting SunHaze option ..............................................................................................48
Selecting music volume ...............................................................................................48

Tanning instructions ..........................................................................................................49

When not to use a sunbed ...........................................................................................49
Minimizing the eventual risks of skin or eye damage ............................................. 49-50

Definition of skin type ........................................................................................................50

What to do in case of sunburn or abnoraml skin reactions ......................................... 50-51

Recommended exposure times ........................................................................................51

Icon46 vv ......................................................................................................................52

Maintenance ............................................................................................................

52

Maintenance chart .............................................................................................................53

Daily inspection prior to first start-up ............................................................................54
Annual inspection or every 1000 hours of operation ....................................................55

Replacement of UV lamps ................................................................................................55

Removing UV lamps out of the top canopy ............................................................ 55-56
Installation of UV lamps into the top canopy ................................................................56
Removing UV lamps out of the sunbed ........................................................................56
Installation of lamps into the sunbed ............................................................................57

Replacement of starters ....................................................................................................58

Survey of UV lamps and starters .................................................................................58
Disassembly of starters ................................................................................................58
Assembly of starts ........................................................................................................59

Replacement of sunbed acrylic ................................................................................... 59-60

Replacement of top canopy acrylic ...................................................................................61

Removal of top canopy acrylic .....................................................................................61
Installation of top canopy acrylic ..................................................................................62

Replacement of HID lamps and filters in the facials ..........................................................63

Disassembly of cover strip ...........................................................................................64
Disassembly of filters ............................................................................................. 64-65
Replacement of HID lamps .................................................................................... 65-66

Summary of Contents for ICON






































































































Reviews: