22
Disassembly of sunbed bench
The rear side of the sunbed bench is fixed lengthwise by the rear column.
The sunbed bench sits about 4″ deep in the column support. At the sides,
the sunbed bench is fixed to the head- and footend construction. There are
two screws at the headend and two screws at the footend.
Unscrew the sunbed bench.
Loosen fixing screws and remove.
At the footend side unplug the connection for the body cooling fan.
Loosen the hose connections for the SunFresh-system:
- Pull connection hoses out of the water container.
Pull out connection hose out of the SunHaze aroma system.
- Push in the blue ring at the connection and hold.
- Pull the hose out of the connection.
- Let go of the blue ring.
Four (4) persons pull the sunbed bench out of the column.
Take the sunbed bench and store at a safe place.
Disassembly of assembly plate
The assembly plate is screwed with two thumb screws to the ground
plate.
Take out the water container for the SunFresh system.
- Pull the water container forward.
- Store the water container at a safe place.
Take out the container for the condensation water.
- Loosen the connection hose to the AC-pump.
- Take out the container for the condensation water and store
at a safe place.
Unplug connection cable to the main control board.
Unscrew assembly plate, remove and store at a safe place.
