23
Disassembly of AC system
The AC system includes:
- AC unit
- drip pan for condensation water
- condensation water pump
- container for condensation water
The cold air exit of the AC unit is connected to an air manifold which
conveyes the cold air into the sunbed.
The AC unit is positioned between two holding brackets at the front and rear
side. The brackets are screwed to the groundplate.
Below the AC unit there is a drip pan which receives the condensation
water. An AC pump sucks the water out of this drip pan and pumps it into
the condensation water container.
Pull the discharge hose out of the hose nozzle at the pump ( if
necessary).
Unplug the flat plug from the connections at the pump.
Remove the front holding bracket for the AC unit and store for further
use.
NOTICE:
The holding bracket also keeps the drip pan below the AC
unit in place.
Pull the drip pan for the condensation water to the footend side, remove
and store for further use.
Pull the AC unit to the footend side, away from the connection stud (1)
and then remove, pulling AC unit forward (2). Two persons carry the AC
unit to the site of installation.
