27
Assembly of bench supports
In order to put the unit into a level position and to compensate for slight
irregularities in the floor, the adjustment screws must be mounted to the
bench supports.
Take adjustment screws out of the box with accessories and screw at
the front and rear side into the bench supports.
Fasten bench supports to the rear column.
NOTICE:
Fasten screws only hand-tight so that bench supports can
still be adjusted when installing the groundplate.
Installation of groundplate
ATTENTION!
Watch for correct position of bench supports and rear column.
Watch carefully for correct position of bench supports and rear column.
Supports and rear column must stand in a right angle position.
Move the groundplate between the bench supports and hang it into the
bench supports. If necessary, correct position of bench supports.
Fasten fixing screws for bench supports tight.
Installation of AC system
The AC system consists of the following components:
- AC unit
- drip pan for condensation water
- condensation water pump
- container for condensation water
Position the cold air exit of the AC unit above the connecting air manifold
of the unit.
Push the AC unit to the rear holding bracket up to the stop position.
