60
Push the sunbed acrylic backwards into the rear plate. This gives you
enough tolerance space to lower the sunbed acrylic into the front profile.
At the front headend side, push the sunbed acrylic down.
- Keep the sunbed acrylic in this position.
Close the sash lock at the headend side:
Turn counter clockwise by 90°.
– The sash lock pushes the sunbed acrylic into the front groove.
At the footend , close to the microswitch, push down the sunbed acrylic.
Close the sash lock at the footend side:
Turn counter clockwise by 90°.
– The sash lock pushes the sunbed acrylic into front groove.
