Clearing with Magnetic Alarm Clearance Card
To Clear an Alarm
With the magnetic alarm
clearance card.
Place The Card
Over the gray activation
button.
A Series of Six Blue
Flashing lights will indicate a
successful alarm clearance.
To Send an Alarm
Simply press the gray activation
button and hold it for at least
one second.
The Pendant Will Vibrate
And you will see a series of
red flashing lights that will
blink rapidly at first and then
will slow to a rate of once
every three seconds until the
alarm is cleared.
Please Note
After Sending an Alarm
The end user can send a
subsequent alarm once
ten seconds has elapsed,
even if the initial alarm has
not been cleared on the
device.
500641
©2018 Advanced Wireless Communications. All rights reserved. *All other trademarks are the property of their respective owners.
(800) 475-5852
20809 Kensington Blvd, Lakeville, MN 55044
www.advancedwireless.com
Quick Start Guide
Waterproof Pendant Activation & Clearing
