Advanced Wireless Communications MINI PRO, User Manual

9.  BASIC OPERATIONS          

CLONE

Step 1:  

Verify the Master radio is properly 

programmed.

Step 2: 

With the Master radio powered off, 

select channel 8.

Step 3: 

Press and hold the monitor button 

down then press and hold the power on button.  

Power on tones are heard followed by a single 

beep in the Master radio speaker.  Do not 

release the monitor and power on buttons until 

the single beep is heard.  After releasing the 

monitor and power on buttons, verify the Master 

radio indicator is a steady orange color.  

Step 4: 

Plug one end of the clone cable into 

the accessory jack of the Master radio.  The 

Master radio is now ready to clone.

Step 5: 

Power on the Slave radio by pressing 

the power on button until the power on tones 

are heard in the radio speaker.  The Slave radio 

indicator will occasionally flash green.

Step 6: 

Plug the other end of the clone cable 

into the Slave radio accessory jack.

Step 7: 

On the Master radio press the power 

on button.  The Master radio indicator will begin 

to flash orange and the Slave radio indicator will 

flash green.

Step 8: 

When cloning is completed, the 

Master radio will be a steady orange color and 

the Slave radio indicator will occasionally flash 

green.  Unplug the clone cable from the Slave 

radio.  Verify the Slave radio has the cloned 

program.

Step 9:  

To clone another Slave radio, repeat 

Steps 5 thru 8.  To end the cloning procedure, 

remove the battery from the Master radio.