4
button on the portable and speak towards the Microphone.
The caller’s voice will be heard via the built-in speaker in
the AdvanceCommunicator™
3.
To end a call in hands-free mode press the END button on
the portable or close portable ’s flip cover.
Making and Receiving calls via the Handset.
1.
To make a call using the AdvanceCommunicator™
Handset, dial the desired number on the portable keypad
and press SEND/GREEN button. Use the handset as you
would with a regular desktop phone.
2.
To receive a call with the Handset, lift the Handset and
press any button on the portable keypad or open the
portable’s flip cover. Use the handset as you would with a
regular desktop phone.
3.
To end a call while using the handset, place the handset
back into the cradle and press the END/RED button, close
the portable’s flip cover.
Use of the AdvanceCommunicator™ with Dispatch calls
1.
To answer a dispatch call in Hands-free mode, press and
hold down the Cradle Switch “H” and speak towards the
Mic “I”
2.
To answer a dispatch call using the handset, pick up the
handset, press and hold down the Handset Switch “J” and
speak into the handset as you would with a regular desktop
phone.
3.
To hear the other party in a dispatch call, release the Cradle
Switch “H” (in Hands-free mode) or the Handset Switch
“J” if using the Handset
Volume Control
The volume of the AdvanceCommunicator™ can be increased or
lowered with the volume buttons on the side of the portable
Recording Feature
1.
The AdvanceCommunicator™ will allow the recording of
audio traffic via a 3.5mm plug.
2.
Dispatch calls will be recorded both audio in and audio out.
