The AdvanceTec Hands-free car kit is designed for use with all
AdvanceTec car kit cradles as well as all Motorola® OEM car kit
cradles for safe and convenient vehicular operation.
The Car Kit (AT6538A) includes:
1. Part # AT8231A
Speaker
2. Part # AT8240A
Junction Box
2. Part # AT8230A
Visor Microphone
3. Part # AT8232A
Power cable
4. Part # AT9299A
PTT Control
5. Part # AT8219A
Adapter Cable for Motorola Cradles
Optional Extras
1. Part #AT7107A Privacy Handset
2. Part # HMN4058A
Potato Mic.
! Note
1. A separate car kit cradle compatible with your mobile must be
purchased for use with this hands-free car kit.
2. If the car kit purchased is Part # AT6537A, Part # AT8219A, adapter
cable for Motorola OEM cradle is not included.
If this car kit is to be used with a Motorola® OEM car kit cradle it
will be necessary to utilize the AdvanceTec Part # AT8219A
adaptor cable (if included or purchased separately, if not
included) to connect the car kit to the Motorola® OEM cradle.
The adaptor cable is NOT required to connect the car kit to an
AdvanceTec car kit cradle.
A properly installed Hands-free Car Kit will minimize service calls and
equipment downtime. Because of the wide variations in vehicle design,
these instructions should be modified to suit each particular installation.
Before beginning the installation process, determine the locations for the
mounting of the Mounting Bracket, Clam Cradle, Push To Talk (PTT)
button, Visor Microphone, Speaker and Junction Box.
Consider the following guideline when planning the installation:
* DO use all mounting hardware provided.
* DO ensure that cables are not placed under stress.
* DO follow and - connections.
* DO crimp connectors securely.
* DO NOT attach components to any part of the vehicle that is not rigid or
is subject to excessive vibration.
* DO NOT install components in areas where rain or snow can easily get
into them, such as next to a vehicle window, which may be left open.
