2
Consider the following guideline when planning the installation:
•
DO use all mounting hardware provided.
•
DO ensure that cables are not placed under stress.
•
DO follow and - connections.
•
DO crimp connectors securely.
•
DO NOT attach components to any part of the vehicle that is not rigid or is
subject to excessive vibration.
•
DO NOT install components in areas where rain or snow can easily get into
them, such as next to a vehicle window, which may be left open.
•
DO NOT dress cables over sharp edges that could cause wear or tearing of
cable insulation.
•
DO NOT install components in locations where they might interfere with the
vehicle operator or operating controls.
•
DO NOT install the Hands-free Cradle where it will be difficult for the
operator to reach.
! WARNING
VEHICLES EQUIPPED WITH AIR BAGS
An air bag inflates with great force. DO NOT place objects, including communications
equipment, in the area over the air bag or in the air bag deployment area. If the
communication equipment is improperly installed and the air bag inflates, this could
cause serious injury.
It is recommended that the installation of the vehicle communication equipment be
performed by a professional installer/technician trained in the requirements for such
installations. An air bag's size, shape and deployment area can vary by vehicle make,
model, and front compartment configuration (for example, bench seat vs. bucket
seats). Contact the vehicle manufacturer's corporate headquarters, if necessary, for
specific air bag information for the vehicle make, model, and front compartment
configuration involved in your communication equipment installation.
Speaker Installation Detail Location
1. Mount the Speaker beneath the dashboard on the passenger's side of the vehicle,
out of the way of the passenger, or some other convenient location.
2. Do not mount the Speaker on the dashboard or the rear window shelf.
3. The Speaker should be located more than four feet from the Car Kit Cradle.
Installation Procedure
1. The Speaker includes a mounting bracket, permitting it to be mounted in a variety
of ways. Loosen the thumbscrews on the side of the speaker and using the
mounting bracket as a template, drill the necessary mounting holes and secure the
bracket with the self-tapping screws provided.
