7
5. To remove the handset from the Cradle, press the release button on the top of
the cradle.
Car Kit Operating Procedure
Car Ignition connection
1. When the car ignition is ON, the Car Kit will stay on as long as the cables are
inserted into both sides on the handset.
2. When the ignition is turned OFF the Car Kit will turn OFF after 60 minutes.
3. Use of the PTT in the vehicle will turn on the Car Kit for 8 minutes, after which it
will turn off again.
Making a dispatch call
1. Dial the desired number on the handset’s key pad
2. Press and hold down the PTT button.
3. Speak towards the visor microphone.
4. Adjust the speaker volume using the handset's volume control
5. Incoming audio will be heard from the amplified speaker.
Making or receiving a hands-free telephone call
1. To receive an incoming hands-free telephone call, press the” SEND" key, any of
the number keys, the # or * key on the handset’s keypad or the PTT button for a
short period. A confirmation tone that the call has been answered will be heard
through the speaker NOTE: If the PTT button is pressed for more than 2 seconds it
will reject and end the call.
2. To make a hands-free telephone call, place the handset into the cradle and dial
the desired number on the handset's keypad and press the "SEND" key.
3. Adjust the speaker volume using the handset's volume control.
4. Incoming audio will be heard through the speaker.
Note: For best audio during an interconnect call set the volume level at 5 bars or
less.
Use of Optional Extra Privacy Handset or Palm Mic
AT7107A – Handset with Cradle AT8410A – Palm Mic
