Installation and Operation Manual S400 series
8
- 8 -
2.1. Powering on
The WIND/WIND-a S400 display does not include an integrated switch. The unit is
powered by a 12 V DC supply on the red (+) and black (-) wires. When stopped, all
settings are memorized.
2.2. Operation in normal mode
2.2.1. Selecting the type of wind
Select the apparent or true wind data (in this case the boat speed must be received
either by the communication bus or by the NMEA input interface) by pressing
An icon "APPARENT" or "TRUE" is displayed to show the different type of wind
display.
The WIND/WIND-a display can only display the true wind if it is connected to a
speedometer or GPS.
2.2.2. Selecting information
The
key is used to select various data in the lower line.
Key operation:
2 General Operation
Wind speed
Wind speed
VMG (if connected to speed source)
VMG (if connected to speed source)
MAX wind speed
MAX wind speed
Battery voltage
Battery voltage
