Zone10e User Manual
22
Multiple Zone10e systems
If you are using an Apple device & have multiple Zone10e systems installed
in your home on the same Wi-Fi network, there are a few extra steps
required to configure the Apple app so you can control all of your systems
from your smart phone or tablet.
1.
On your iPhone/iPad open the “Settings” app
2.
Swipe down the list until you find “Zone10e” then press it
3.
Press “Systems”
4.
Ensure “Multiple” is selected.
Installation Troubleshooting
1.
Is your device an iPhone 3 or older? Apple no longer supports these
devices and our app cannot be downloaded to your device, Zone10e
requires iOS 7.0 or greater.
2.
If you are using an iPad you will need to select the iPhone apps
button at the top of the search results screen.
If your device does not fall into the above categories, you should not
experience any problem downloading the app to your device.