13
VI. Trouble Shooting
PROBLEM
CAUSE
REMEDY
Solenoids not
activating
Power Source
Output Power
Bad or Dirty Level Floats
Faulty Wiring to Level Floats
Check power source
Check or replace fuse
Clean or replace as needed
Level floats as needed
System not spraying
Dirty Bowl Injection Nozzle
Clogged Y-Strainer Screen
Low Water Pressure
Clean as needed
Clean as needed
Lower regulator setting
No system power
Power Source
Check Fuse
Check power source
Replace as needed
No output power
Check Ribbon (120/240V Controller)
Check Fuse
Make sure connection is fully seated on
both ends
Replace as needed
(C-2 Option)
False reading
Bad or Dirty Electrode
Out of Calibration
Clean as needed
Calibrate unit
Will not calibrate
Dirty Electrode
Faulty Electrode
Faulty Wiring to Electrode
Out of Calibration
Clean electrode
Replace controller or
Replace as needed
Calibrate unit
Alarm Lights ON
System has utilized all bowls
Reset to bowl #1
Summary of Contents for SFS Series
Page 15: ...15 Notes ...
